Building a Lean to Shed – Tips For Making A Wooden Slant Roof Shed

Making a lean-to shed has been proven to solve most, if not all, the storage problems present in any household. If you have an existing building that is structurally sound then you can simply add a lean-to. It’s a real simple project and today we are going to show how you can get this built.

Decide whether or not the structure will be attached to an existing building or built as a standalone style structure. Determine the building’s proposed size that will be built and ensure there is enough space to build it. Make a sketch of the model you intend to build and decide on the measurements that will be used. Take into consideration the amount of supplies needed as well as any specific details needed for styling.

Outline the identified area that the structure will be with 12″ wooden stakes. Block off the area by wrapping string tightly around the stakes. Cut 2 x 4 inch pieces of lumber to the preferred length to be build the floor of the shed. Secure the floor boards in place with 16d galvanized nails. Next use ¾” thick plywood to cover the 2 x 4 floor boards.

Using your sketch as a guide, proceed to frame the walls that are going to be used for your shed. Reinforce the wall framing by using metal braces to hold each corner in the shed. Determine the position in which your door will be and proceed to door the frame. Use the 2 x 4 inch lumber cut pieces to build the frame for the door.

Purchasing a ready-made door may prove to be an easier route than building a door.

Use 2 x 4 inch planks of lumber to cover the area of the building. The nailing pattern used to do this is not important, however, galvanized construction grade nails must be used.

By hanging a plumb line on the nails one can ensure that all the corners are perfectly square.

To build your roof rafters you will need to cut and use 2 x 4 inch pieces of lumber. The style roof chosen to use will determine the amount of lumber used. If you intend on making a lean-to with a flat style roof then you will need to mount 2″ by 4″ lumber pieces horizontally on top of the wall frames using ¾ inch thick plywood so that it covers the entire shed.

If your choice is to build a more pitched style roof you will need to construct this by creating L-shaped rafters by joining the boards together. Before proceeding to install the plywood bolt the rafters to the wall frames. Once complete, use shingles to cover the roof being sure to nail them in place from the inside of the shed.

When making a lean-to shed you can opt to use a variety finishes on the structure. You can sand its entire surface using sanding paper with medium grit to smooth all the rough edges. Then prime and paint the wooden exterior surfaces using any preferred designs.

Mexican Style Decor Imbues a Bright & Sunny Atmosphere

The commercialized aspects of Mexican decor – those smiling cartoon peppers in big sombreros and ubiquitous combinations of turquoise and pink are pale, watered-down imitations compared to the true vibrancy of Mexican culture.

Mexicans are people of earth and sun and these combinations are reflected in their decorating style. A true Mexican home is a lively combination of earth tones in walls and furniture with accents such as red, yellow, beige, orange, green, and blue. To create the perfect balance of these shades, it is best to first study Mexican culture closely.

One of the most distinct characteristics of Mexican decorating is their clay-based terra cotta pottery. Jugs, pots and vases all are created in this pottery. Among the most unique of these designs is a California strawberry pot. With its many planting holes, this single pot can serve as an entire indoor herb garden. Besides the standard red-brown of terra cotta, these pots are often painted with the vivid reds, yellows and blues typical of the culture. Among the topics for terra cotta pottery are sun and moon faces, suitable as wall decorations both inside and outdoors.

Representations of the Aztec and Mayan calendars also are popular decorations in Mexican style. These decorative, highly detailed pieces are made in plaster, hydro-stone and tinted wood, and are fascinating enough to serve as the focal point in any Mexican room.

Mexican rugs have a distinct power to transform any space. Flat-weaved wool rugs are typical of Mexican design and they come in nearly every size and color imaginable. For a room with an open, airy feel to it, choose solid colored rugs with lighter shades of yellow, red, orange and green, which are common in Mexican decor. To make a big room look smaller, select Zapotec rugs from Oaxaca, Mexico. These rugs are made in beautiful, bold patterns. To define two spaces in one large room, consider two differently shaped rugs in different sizes with similar but not the same, Mexican patterns.

Artwork from Mexican Culture can accent a room, inspire a color scheme, or bring a touch of whimsy to a space. For instance, large framed cards from the popular Mexican game “La Loteria,” a card game similar to Bingo, can be used as wall art. There are also paper-mache folk art figures and scenes inspired by the Day of the Dead, or “El Dia de los Muertos,” the Mexican holiday that reveres and celebrates ancestors. For those with an eye for more sophisticated fare, prints by the famous Mexican woman painter Frida Kahlo can give true Mexican flare to any room.

Finally, don’t overlook the wealth of Mexican fabric art. Magnificent shawls, serapes and sombreros are typical of these fabric forms. Shawls can be quite colorful and delicate, while serapes are heavier and sturdier, like blankets. Sombreros, too, can show two designs: the simple woven straw of the Mexican peasants, or the elaborately decorated headgear often worn by the elite owners of rancheros. Choose wisely among the many offerings in fabric art to make sure they complement the color and style of your vivid and lively Mexican decor.

Simple Plumbing Tips – Using Sealant to Fix Your Plumbing System

Thousands of people are spending thousands of dollars for their plumbing system, while millions of people are spending hundreds of dollars just to fix simple repairs. Although there are some who are already aware of the simple plumbing repairs that they can do, majority are still unaware of the things that should be done when dealing with problems in their plumbing system.

A sealant can solve almost all of the problems that you have with your plumbing system. Aside from being very useful, it is also not that expensive, so there won’t be any reason for you not to have it with you. A sealant can also be used on your roof, so you don’t have to worry about buying something that you will only be used once.

How does it work?

A sealant is a substance that feels like clay when molding. This will allow you to mold the sealant according to the size of the hole in your plumbing system. All you have to do is to apply it on the damaged area, and make sure that every part is covered with it. When dry, a sealant is as hard as rock, and will block the hole in your plumbing system. It can also last for years, so you don’t have to worry about doing it on a regular basis.

Types of sealant

There are basically two types of sealants that you can use; waterproof and non-waterproof. Both work the same, but the non-waterproof is less expensive. The only problem that you will experience if you are going to use a non-waterproof is that you need to shut down the main source of water when applying the sealant. Fear not, because when it dries up, it will still work perfectly and will be as hard as rock. The waterproof sealant will dry up even while exposed to water, so you will be able to work with it without shutting the main source of water.

Where can you buy it?

It is available in almost any hardware that you can find. In fact, a small store even has one for sale. It won’t be a problem for you to look for a sealant, so you really don’t have a reason not to buy one, especially now that you know how useful it will be for you. This very simple tool will help you save hundreds of dollars in the long run, because you won’t need the service of a plumbing contractor.

Designing a Slant Roof Shed – Simple Ways To Make A Shed Quickly

Designing a slant roof shed is extremely easy for woodworking enthusiasts. Slant roof sheds are known for their lop-sided roof and adding one to your yard can be a great utilization of open space. The shed can serve as your gardening shed or just a normal storage space to put your junk items. Here’s a simple method to build a slant roof shed.

Start with flooring: To form the flooring for your shed you can use a simple mixture of concrete. Choose the area for your shed and clean it and then plaster the concrete. After the concrete dries you can add spare wooden flooring to it for a personal touch.

Adding the posts: You’ll need four 4×4 posts, to form the basic structure of the shed. Fix these in the four corners of your cleaned area and secure them with concrete and limestone. Bury the two back posts in 3 feet deep holes, while the front posts should be buried in 4 feet deep holes. Secure the outside 6 inches of your base with concrete, to form a border of your base. This layer should be at least three inches wide.

Base of roof and bottom: To form the base of your roof you need to procure wooden beams of 2″ width and length according to length of your shed. Now nail the beams to the top sides of the posts, forming the basic shape for the roof. Similarly using 2″ beams, create the base of the shed by nailing the beams to the bottom of the posts, from the inside of the shed.

Roof: The roof can be made with a corrugated tin sheet. These tin sheets are available in various sizes and widths. Cut a fairly large piece of tin sheet, larger than your roof base. Now you need to drill 2×4″ screws in the tin sheet and secure it to your roof base.

Siding: Siding can be made with tin sheets too, but using wooden planks would be a better option. To form the siding of the shed you can use 3″ wide wooden planks and nail them to the roof base and your bottom base with 2×4″ nails or screws. Secure them tightly to avoid gaps. To provide extra support, fix plywood on these sidings from the inside.

Add the door: Choose the side where you want the door of your shed to be. Cut away an opening into the side of the wall, slightly larger than the door. Fix a frame of 2×4″ into the hole and then with fairly sturdy hinges attach the door. The door can be fairly basic or costly according to your need and use of the shed. Preferably use a wooden door.

Place the window: You can create a simple window for your shed on the opposite side of your door. Make a fairly large hole in the side of the wall where you want the window to be at about half the height of your door. Fix a similar frame as your door for the window. Attach a simple pull up shutter for it.

Decorative Bed Pillows Beautifying One’s Room With Touch of Style

The bedroom seems to be the most private and most relaxing place to stay at home. There is a unique comfort and solace that we can find from just being in a room where one can get quiet and peace for a relaxing moment. There are some people who want to make their room more homey, inspiring, lively, comfortable and elegant. They usually resort to different room decorating styles to make their rooms more stylish and comfortable to stay in.

Decorative bed pillows are among those that many buy to add more style in their room. It is very cheap to buy as compared to other interior decorations that one may add to their display inside their room. There are various designs and styles for bed pillows that will match the room painting, interior décor, and other furniture displayed inside the room. They usually come in various designs, colors, and elegant styles that add more life to the room’s interior designs.

There are so many decorative designs available that can match your bed sheet, bed frame, comforters, and bed pillows. They are of unique beauty that they can be good as interior designs to a room as well. You can always play with different ideas when you want to create a different ambience into your room. You can use vibrant colors to keep the room alive and full of life or choose pastel colors to make the room more relaxing. Because the bed is essential furniture in a room, one can always make it look more elegant with decorative bed pillows.

You need not overdo decorating your room. Buying bed pillows of the right size and the appropriate number of pillows suitable to the size of your bed should be a consideration. The color should also be one that will harmonize with the room interior and other furniture inside the room. Buying decorative bed pillows of the right kind that will be best for your room is not a difficult task. There are so many available in the local market and more choices available when you shop online. They come in various sizes, shapes and colors that you need not labor to find the one that matches your bed, sheets, and comforters.

You will certainly enjoy making your own decorative designs to your room with pillows that can add more elegance and style to your own styling ideas. It is fun to transform your room into something that can make you feel so comfortable and at home. And the available decorative designs and styles for bed pillows are always there to give your room a good make over.

Plumbing Tips That Will Help Avoid Costly Repairs

Plumbing repairs can be very costly. Truth is, wear and tear on your fixtures is inevitable and could occur anytime. Your sink might get clogged up in the wee hours of the morning and there is no one you can call for help.

As much as we want to deal with the problem without having to hire the services of a professorial, the most practical way to address the issue is to ask for help. While you can always hire the services of a professional plumber, there are a few plumbing tips you can employ at home in order to avoid costly repairs.

A little problem that is left untreated can actually turn into a nightmare. If you see a leak on your service pipe, take necessary actions to have it fixed. Remember that no matter how small the problem is, it needs to be taken care of right away.

Small repairs such as changing the washer or cartridge don’t require the expertise of a plumber. You can actually do it yourself without having to call for help. But if you feel that you can’t handle the problem as it is beyond your skills, call for some help as soon as the problem occurs.

Home maintenance should include taking care of any material that may cause your drain and sink to clog up. Likewise, you also have to take care of the grease and oil buildup that clog up you sink. To address the problem, you must collect excess grease in different containers and then dispose it when it solidifies.

Another option is to hire the services of a reputable plumbing company. The plumbing company will check your system every so often and could prevent you from worrying about major plumbing issues in the future. Remember that the sooner you take preventive actions, the more money you can save on costly repairs.

Truth is, your plumbing system eats a portion of your income. If you notice any part of your plumbing system that needs repair, then you might want to consider replacing it. Sometimes, replacing a system is considered a wise investment. It is better to spend money and have your fixture replaced than incur recurring fees for costly repairs.

Make sure you check your water-heater, faucets and showerheads. If you have hired the services of a plumbing company, make sure you have everything checked and ask for possible replacements.

Sewer Odor Experts for Roof Top Sewer Vent Stack Filters

Every state, city, and village either has odor ordinances or treats obnoxious odors perceptible beyond property lines as public disturbances/nuisance. All plumbing vent stacks produce odors unless they fitted with a filter. OSHA warns that levels of 300-ppm (H2S) cause the olfactory nerve to lose sensitivity. At first a “rotten egg” odor is detected but on the second or third breath the odor is no longer noticed. All major odor problems have associated fines or other penalties.

When you are experiencing sewer or septic smells inside a home or business not near a plumbing fixture these odors are most likely coming from your sewer vent stacks on your roof. All plumbing vent stacks produce odors including that “rotten egg” smell caused by hydrogen sulfide gas unless they are fitted with a filter. One of the most common problems is the sewer gas (H2S) is drawn into the fresh air intakes on the roof from the air conditioning systems. On roofs industrial buildings code also require fresh air intake for building air balance against all the stale air exhausted through roof vents. The potential problem can be identified through basic smell of odor when on the roof or around the perimeter of the building as hydrogen sulfide (H2S) gas is heavier than air and thus falls to “nose level” quickly when the wind blows just right. A professional can use a H2S measuring device to detect and measure sewer gas concentration being omitted from specific roof vent stacks. The vents omitting gas is a natural occurrence on most homes and buildings because that’s the way they are designed.

Raising roof vent stacks does not solve the problem it only displaces it on a windy day to blow over the exterior wall to open windows, the patio, the fireplace, the garden, pool area, sidewalk, front door, driveway, or parking lot. On a non-wind day sewer gas is heavier than air and will settle on roof and cause intermittent sewer odors in the home or building.

Installing a One way valve on the sewer stacks will reduce the sewer gas that vents to the roof through the opening and closing of the valve. The Mechanical Engineers design the sewer venting system for it to be a sealed system in the home or business but unrestricted venting to the atmosphere. This type of system defeats the original design intent for all building designs. The system operates on demand of actions in the home or business such as the flush of a toilet or turning on a sink. Since this type of system is capping the vent stacks, it is pressurizing the sewer system in the home or business. It is creating more of a potential for sewer gas odor problems. Any type of bad plumbing seals or gaskets that that may have a small leak will cause the problem to intensify. The vent is now mechanically opened and closed by a valve. It can fail in open position too. This introduces sewer gas to the roof, when it fails.

Charcoal vent stack filters on the sewer stacks is one odor filters on the market but is less effective when introduced to moisture which causes it to solidify or cake up. Sewer gas from the vent stacks is extremely high with moisture since the systems primary function is to drain water in a sealed system underground away from the building. In my opinion this product is not the right product for this application.

I recommend for homes odor eliminator vent stack filters that use Zeocarbon. Zeocarbon is a mixture of carbon and zeolite rock, which has been independently demonstrated to work up to 7 times longer than regular carbon alone. Vent stack filters using this technology are unique in that they actually regenerate themselves for up to 5 years. These systems use sunlight. The exterior, interior, and zeocarbon replaceable bags themselves are impregnated with titanium dioxide (approximately the same quantity and type in most popular toothpastes on the market). When exposed to direct sunlight the titanium dioxide produces ozone, which directly destroys odors and regenerates the zeocarbon. When combined with “no flow periods” common to most households, this design allow us to operate up to 5 years without refilling the units. Many units completely block any regenerative UV sunlight though the use of opaque rain caps and guards that promote the development of odor producing bacteria. However because the zeocarbon can only absorb so much gas, this type filter is designed with a low cost, easily replaceable insert bags. Another good thing on this type filter is the restriction on the airflow is so slight (it has a pressure differential measured at only 1.5″ w.g./ft@50 fpm) that it does not interfere with normal venting of the plumbing system. This type filter is made with animal resistant self-cleaning screens coupled with the frost proof insulating solar heat absorption design characteristics, protects the vent stack from plugging in all seasons.

The zeocarbon filter not only traps sewer gases at the roof vent, so they cannot escape into the air at all, but it also means less air pollution from GREENHOUSE GASES. It particularly traps ammonia, carbon dioxide (global warming) and hydrogen sulfide (the rotten-egg smelling gas), which the filter traps on an 18-24% wt/wt basis, and used zeocarbon acts as an excellent source of nitrogen when mixed with soil. Even though the filter is installed directly on the vent pipe, it’s frost proof design is such that it not only does not impede air being drawn into the vent, it prevent hoar frost plugging and keeps out insects and critters. This filter is also for vents that are directly connected to aerated or non aerated septic tanks, septic mounds, drain fields, landfill vents, compost vents, etc. In many instances, city-sewer connections bring gas into the home’s plumbing vents which vent the gases out the roof vent and often down into the back yard where they can be drawn into the home. This type filter has proven beneficial in those cases too!

I recommend for mobile homes, restaurants, daycare centers, nursing homes, and schools, odor eliminator vent stack filters that filter the harmful sewer odors by oxidation. Oxidation is accomplished with chlorine dioxide technology. Because chlorine dioxide reacts selectively and primarily with only the most offensive odor producing compounds (hydrogen sulfide, organic sulfurs, organic amines) the Odor Eliminators will normally provide a much longer service life than products such as activated carbon. With a properly designed filter that allows the original design of the system plumbing system to function does not pressurize the lines like some of the other products on the market. Moisture does not have a negative effect on the Eliminator therefore unwanted reactions do not occur and power is not needlessly spent allowing chlorine dioxide to be available and ready on demand. The result is safe, extremely effective, broad-spectrum malodor control. Chlorine dioxide remains available and ready on demand.

Polishing is accomplished with technology that protects against the escape of malodors can not be oxidized. It incorporates polymeric adsorption and electrostatic bonding technologies. Polishing and oxidizing are accomplished simultaneously. The result is safe (utilizing the same material approved for food storage by the USDA), extremely effective, broad-spectrum malodor control. (Request Form No. 502 from USDA for more detailed information.)

After you have installed roof stack vent filters, inside odors are most likely coming from leaking wax seals or gaskets on your plumbing fixtures. In this case the odor is concentrated typically in an isolated area, the bathrooms. It can be intermittent due to several building mechanical system designs. Bathroom fixtures have a p-trap built-in the fixture so if the fixture becomes loose from the floor or the wall the wax seal or gasket can leak. This type of leak will allow sewer gas to leak directly into the room. Most bathrooms have an exhaust fan which intensifies the introduction of the gas into the room by pulling the gas from the source, the leaking seal at the floor moving it to the ceiling exhaust vent prior to exhausting the gas from the space. This condition is detected through smell or a professional can use a H2S measuring device to detect and measure sewer gas concentration. The remedy for this problem is to replace the bad fixture seals. Contact your preventive maintenance group or to arrange for a local technician help with this problem.

Bathroom odors can also be traced to urine absorption into the tile or tile grout.
Many businesses try to mask the odor by installing a deodorizer mister in the bathroom to spray a scented to product to mask the odors in bathrooms. With proper maintenance of fixtures in the bathrooms and the correct initial designed systems operating correctly this problem should be eliminated. If this condition is corrected overtime it can worsen and affect other parts of the business.

Odor and constant smell can be due to the build up of urine saturating tile grout around urinals and tile grout. There are spray products that eliminates this problem by using it in a regular maintenance program.

When you have floor sinks, drains and floor / wall clean outs dry of water especially in basements of homes and businesses in the production or mechanical areas you will often detect an offensive odor. A dried out p-trap allows the sewer system to vent freely into the space. In the case of a restaurant or any building with an exhaust system that may be in a negative air balance the problem is intensified. The exhaust system can draw the sewer gas into the facility. The affect on an isolated area is not uncommon or if it is near a return on the HVAC system circulate it through out the building. The most efficient way to identify if you have this problem is to do a smoke test on the sewer system. Prior to doing the smoke test we would first recommend verifying all floor sinks and drains have water in the p-traps. This would include the units in isolated rooms such as the mechanical areas and the units installed behind or under equipment. The wall clean outs can be visually inspected but are difficult to detect leakage without a H2S meter or a smoke test. The dried out p-trap when identified can be fixed by adding water to fill the p-trap. Contact your preventive maintenance group to help with this problem.

Show Your Family The Greatest Pride – Decorate Your Living Room Using Shabby Chic

Many tend to associate shabby chic decorating with femininity yet I disagree. To me shabby chic is a decorating style that expresses pride in history by using furniture, sofas, and pieces of art from earlier periods, the vintage pieces ideally look a little worn, to create a beautifully aged design scheme.

It was in the 1980s when Rachel Ashwell began the use of this term, then an inexpensive line of furniture became popular for shabby chic decorating. The furniture associates with a number of historical designs from different periods, the pieces are created to look as if they’re older, worn and from an earlier period, for instance the 18oo’s country French, Shaker designs, plus many others.

This style will turn your living room into a comfortable space with the romance of things that are old or vintage pieces that have a purpose. A shabby chic living room is perfect if you’ll like to show off your favorite accessories and antiques. And best of all it is possible to create your own shabby chic decor using items in your home and paints.

How To Paint Shabby Chic Furniture

When painting shabby chic furniture home decorators get an inner sense of pride and save cash because the decorator creates the finished product.With style of painting each piece of furniture is created as the decorator desires. Shabby chic decorating is a cozy, stylish and relaxing look and a perfect way to preserve vintage items.

Shabby chic shows class and pride in character, and can be used for any room of your home such as the nursery, living room and guest room. Arrange articles that are different and then paint theme to give them a uniform appearance.

I’ll outline some tips here that will give your home the pride of the peacock:

* Choose pieces that are a bit old and worn out to paint in shabby chic decorating, usually vintage pieces and second-hand items are best for the cause. It is OK if the finishing is in bad shape because they will be painted.

* For painting you must break away from tradition, choose light colors and pastel. Some ideal choices include lavender, light blue, pink, light green, and light yellow gel.

* If the piece you have chosen is made of laminated materials, first clean it of all the old dirt and chipping paint with sandpaper, then use a quality primer to coat it before painting.

* Rub candle wax onto the furniture to prevent the paint from sticking, then begin painting by simply adding layers of the selected color. The great news is you don’t have to be a professional painter to create great shabby chic furniture.

* Use uniformity in your scheme, by choosing identical color fabrics for your curtains and the shades. Consider tea stained fabrics in similar colors and shades in a combination of prints like floral, striped and checked matching the background with the same color.

The pride of creating shabby chic furniture belongs to everyone, even if you don’t have any old or antique furniture in your home. From thrift shops and garage sales look for pieces of furniture that have some antique lines, or furniture with a lot of curves. There is no need to spend on expensive beds, large closets, or huge sofas, nothing has to be purchased. Many decorators do shabby chic painting using old suitcases, stools, pieces of broken glasses, broken vases and lamps, with a little bit of reason and a sense of freedom home decorators can find pride in shabby chic decor.

If you take pride in preserving old furniture you’ll be amazed at the opportunities this style of decorating offers. Restore a worn deck chair for living room furniture, fix up old wood using a transparent blue stain paint. Bring in a garden arbor to make your scheme distinctive, use garden statues such as angels, or combine pieces from your grandmother’s home with pieces you have chosen. If you take pride in preserving old furniture these ideas will make you a proud decorator

In the living room decorators can use house hold furniture already in their home, they can sand half of the paint off a piece to give it a worn look or add a light layer of paint to a wood piece. Decorators may also use several layers of different shades on top of one another, so that the shabby chic piece appears to be from an earlier age, the idea is to break up sets by painting each piece a different color. The paint treatment can also be used to create a cottage tile floor, by painting the floor to resemble a blue and white checkerboard.

Noteworthy qualities of a shabby chic wall include: the paint color is light such as cream. Artwork can be created by grouping plates together, use floral plates or solid colored trays. Also paneling and bead board is very popular with shabby chic.

Turn your light fixtures into chandeliers with paints for shabby chic decorating, using cream or butter yellow color hang crystals from the room’s light fixtures. Incorporate various sizes and shapes of crystals to stimulate curiosity and to break away from conventional decor. Also decoupage a floral pattern to show charter, onto the outside of light shades.

Break away from older ideas for decorating, remove the glass from old window frames, and suspend the window from the ceiling for a room divider with a shabby chic element.

We have just had a discussion on shabby chic decoration, this style will take personal commitment and pride in your ability to decorate. So now you know the secrets, it is up to you to separate excellence from inaction, with a bit of reason and a sense of freedom you’ll proud of the results. Look for more articles and writings by me on home decor, I look forward to future discussions on this exciting subject.

Everything You Need to Know About Do-It-Yourself Plumbing

Plumbing is one of the most important amenities within a house in the modern world. Accessing clean water at any designated point within your home is a convenient and necessary need that should be available at all times. Since indoor plumbing is also one of the most commonly used amenities in the house, it stands to reason that it is also one that requires regular maintenance. Whether it is replacing a broken or leaky faucet, unblocking one of the many drains around the house or sealing and replacing a broken pipe, it is important to be prepared for routine plumbing maintenance whenever a problem creeps up.

To be able to deal with common plumbing issues at home you have to be alert to some of the most common problems and a list of the simplest ways to deal with such problems. Below is a useful guide on how you can prepare to resolve common plumbing problems.

What you need for Common Do-It-Yourself Plumbing Projects

Any signs of plumbing issues should be addressed as early as possible to avoid compounding the problems. One dripping tap can seem like a non-issue, but it will subsequently translate into a higher water bill with time. It is, therefore, important to have a collection of common plumbing tools to address any issues before they turn into higher costs.

Cracked pipes and leaky toilets are a common plumbing issue that can result in extensive damage if left unresolved. A cracked pipe may be as a result of winter freezing or high water pressure which the pipes cannot hold while a broken flushing unit may cause the toilet to leak continuously. When water pressure rises, the cracked pipe may burst and send a gushing stream of water into your basement. On the other hand, a leaky toilet flushing mechanism necessitates regular flushing thus resulting in unnecessary consumption of water, and where you forget to flush water may flood your home’s bathrooms and rush into other rooms and damaging floors and carpets.

The above situations can be easily resolved be knowing where all shut off valves are located. Shut off valves are used to cut water supply to specific areas of the house or plumbing fixtures or in the case of the main valve, cut water supply to the whole house. Shut off valves to sinks and toilet flushing units can be used to cut water supply to any leaky plumbing fixture.

The success of all do-it-yourself projects heavily relies on your ability to be able to accomplish a certain task. When it comes to plumbing the most important thing you have to keep in mind is the number to your local plumber. Many things could go wrong during routine maintenance of domestic plumbing, and this number can prove to be vital in such cases.

Installing Slate Flooring in Your Home – Benefits and Disadvantages

If you’re not sure what slate is, it is a grayish rock that sometimes is found with a hue of green or blue on it. It’s commonly used on roofs, walls and ceiling. People have started also using it for their floors as well. Installing slate flooring in your home is a very feasible flooring option that you should not dismiss lightly.

You can practically add slate flooring in each room as it lends the room ambient a level of elegance and sophistication that many other floors just can’t offer. It is easy to care for and it is really a durable, long lasting material. Some people have slate floors for many years and they have never thought of changing it to anything else.

It is not difficult to install and once properly installed, all you need to do is keep it clean. There is not much maintenance involved with this material, unlike some other ones like hardwood flooring, for example.

One of the main disadvantages of it though is cost. It is not cheap to get and the upfront costs might be a bit high for some people. It is definitely more costly than vinyl, tile and laminate. However given the longevity of the slate, which can easily outlast many of the other options, in the long run the cost is easily offset, particularly when you think that some other materials like hardwood need heavy regular maintenance like sanding and refinishing, which are not cheap.

Another light disadvantage of it is that it chips rather easily if something heavy falls on it. It also scratches, so when you move your furniture on this floor, you need to add some adequate padding to avoid scratching it.